Contact Us Today 📱 +1-757-516-7358 📧 info@pelletpressdiesets.com

9.52x9.52 mm (3/8x3/8 inch) SQUARE Pellet Press Die Set
Yield Strength Hardened Steel 80,000 psi (550 MPa)
Recommended max loading @ 50 % 40,000 psi (275 MPa)
Recommended max force 4400 lb (2.2 ton, 20 kN)
Typical force for quality pellets 550-1660 lb (0.28-0.83 ton, 2.4-7.3 kN)
Die sleeve inner opening 9.58 x 9.58 mm (3/8 x 3/8 inch)
Die sleeve height 40 mm (1.57 inch)
Die sleeve outer diameter 45 mm (1.77 inch)
Assembled height with spacers (w/o powder)* 89 mm (3.5 inch)
Assembled height no spacers (w/o powder)* 73 mm (2.87 inch)

*If making thicker pellets, the die set can operate just the same without spacers.

Recommended max force = Is the maximum force you can put the die set under. This includes a 50% safety margin which is industry standard.

Typical force for quality pellets = This is the range we recommend using that will get you a great pellet and is much less than the recommended max force.

9.52x9.52 mm (3/8x3/8 inch) SQUARE Pellet Press Die Set

Vendor
Pellet Press Die Sets
Regular price
$345.00
Sale price
$345.00

Pellet Die set for making 9.52 x 9.52mm (~3/8 x 3/8 inch) square pellets from powders. 

With your die set order we’ll include:

  • Die sleeve
  • Plunger rod
  • 2 x spacers
  • Base plate
  • Aluminium release ring with cutout for viewing pellet during release

Shipping: Free fast shipping across USA and Canada

Material: hardened tool steel (Rockwell hardness >C60) polished to a high tolerance fit.

  • Worldwide shipping, Free to North America

  • Precision Made, Individually Inspected

  • High Strength Heat Treated Steel

Limited stock - let us know if you need more. 

Die made of hardened tool steel (Rockwell hardness >C60) for long lasting trouble free performance. Sleeve is polished to high tolerances to allow the hardened tool steel plunger to slide through perfectly. Plunger and spacers are made from high yield strength steel, machined and polished to high tolerance for the perfect fit. Interior surfaces ground to mirror-like finish.

Below is a video of the 6x6 mm die set for illustration purposes only.


For an animation of die assembly, powder pressing and release click here.

Yield Strength Hardened Steel 80,000 psi (550 MPa)
Recommended max loading @ 50 % 40,000 psi (275 MPa)
Recommended max force 4400 lb (2.2 ton, 20 kN)
Typical force for quality pellets 550-1660 lb (0.28-0.83 ton, 2.4-7.3 kN)
Die sleeve inner opening 9.58 x 9.58 mm (3/8 x 3/8 inch)
Die sleeve height 40 mm (1.57 inch)
Die sleeve outer diameter 45 mm (1.77 inch)
Assembled height with spacers (w/o powder)* 89 mm (3.5 inch)
Assembled height no spacers (w/o powder)* 73 mm (2.87 inch)

*If making thicker pellets, the die set can operate just the same without spacers.

Safety:

  • Always wear googles and safety protection equipment
  • Clean well after use to prevent rusting.
  • Do not apply pressure beyond shown on table.

See our tips for making perfect pellets here.